1.9" SPI LCD Display Module 170x320 IPS Screen ST 7789 with 65K RGB Colors Compatible with Arduino

1.9inch SPI display screen parameter Size: 1.9inch Display Color: RGB 65K color Panel Material: IPS full view angle Resolution: 170*320 Interface: 4-wire SPI Drive IC: ST 7789 Touch: No Luminance: 480Cd/m2 LED Current: 42.8(mA) Power Consumption: 0.25w Active Area: 22.695x42.72(mm) PCB Size: 29.00x62.00(mm) Weight: 13g Working Temperature: -30 °C to 80 °C Storage Temperature: -30 °C to 80 °C Power voltage: 3.3V Pin Definition 1 GND: LCD Power ground 2 VCC: LCD power supply is positive (3.3V) 3 SCL: LCD SPI bus clock signal 4 SDA: LCD SPI bus write data signal 5 RES: LCD reset control signal(Low level reset) 6 DC: LCD register / data selection control signal (Low level: register, high level: data) 7 CS: LCD selection control signal(Low level enable) 8 BLK: LCD backlight control signal (high level lighting, if you do not need control, please connect 3.3V)

• 1.9-inch color screen, support 65K color display, display rich colors
• 170x320 resolution, clear display. IPS full view panel, ultra wide viewing angle
• Use 4-wire SPI serial bus, requiring only a few I/O pins to light up the display
• Operation Voltage: 3.3V, compatible with arduino, STM32, Raspberry Pi
• Widely used with many development boards to display temperature humidity, image, text, number etc.
• Applicable products: walkie-talkies, electronic scales, electric ovens, electric rice cookers, attendance machines, learning machines, POS machines, smart speakers, drones, industrial control screens