Log Splitter Build Kit with 4.5" Cylinder, 25GPM, 3500PSI, Adjustable Detent Valve, Hose, and Fittings

Our cylinders will replace your originaldouble-acting cylinders that have the double-ear mounting clevis as shown in our pictures without any modifications needed. Most of the time they are direct-fit.\ Log Splitter Cylinder, 4.5" Bore, 24" Stroke (5" OD) Clevis Style Mount. This is the valve used on most log splitters. Single spool, Open center. Max pressure rating: 3500psi. Relief valve set at 3000psi but is adjustable. Working ports ½”NPT. In/Out ports ¾” NPT. Detent Pressure set at 700 psi but is adjustable. Screw off end cap for easily detent pressure adjustability.

• All welded design
• This cylinder to be used with any 2 stage gear pump (Common are 11gpm, 13gpm and 16gpm)
• Provides approximately 27 tons of splitting force
• Double-Acting (Forward and Reverse Rebuildable (seals can be replaced)
• 1-3/4" Chrome rod with 9/16" mounting hole for wedge mounting
• Double mounting clevis design to accept 1-1/8"
• 24" stroke
• 4-1/2" diameter bore 1/2" NPT hydraulic ports
• 3500 maximum operating pressure
• 1-1/8" Clevis mounting holes to mount cylinder at front of beam