Show Car Finish Superior Performance 2k Primer Includes Activator Made in USA

This product is Direct to Metal, can be use as a sealer and it wont plug your sandpaper. This is a high end High Build Primer. This is better than anything the major suppliers puts out. Made in the USA. Mix 4 to 1. This is absolutely amazing when using as a one coat sealer. Lay down a single coat, allow to flash about a half hour at 75 degrees and then lay down your first coat of color. Make sure it has properly flashed. Use it as a spot primer on small sand thru areas right before laying down color. We've all done it, keep this handy for spot priming, it does not leave a rough over spray of any kind!!Jjust lightly tack edges of primed spot and start your color coats. Use this product over fresh media blasting or sand blasting. A little of this product GOES A LONG WAY. Lay down a beautiful smooth coat of this primer after blasting. Also use it over filler, mixed 4 to 1 apply 2 coats. As a sealer just apply one wet coat similar to spraying a single stage urethane color, it lays out very smooth and dries with a nice sheen perfect foundation for your color coat. Try it, you will be amazed on how nice this is. Terrific transfer efficiency and almost no over spray.

• Direct to Metal, use as a very smooth 2k sealer, wont plug your sandpaper.
• smooth finish, can be used as a sealer
• Won't plug your sandpaper
• High end primer
• This is NOT the cheap stuff