XENITE Chimney Smoke Extractor, Electric Chimney Fan Chimney Ventilation Fans Roof Inductor Fan Chimney Exhaust Fan

The most widely used and recognized smoke extractor in smoke extraction systems. Thanks to the classic system, thanks to the high quality, in compliance with the strictest parameters of European certification, an ideal balance between easy installation and safe use is achieved.Product weight: 2,4 kgVoltage: 190-240VColor: Image ColorNote1.The household fireplace uses a suction fan, and the outlet temperature should not exceed 60°C. Otherwise, the suction fan will be damaged. Install the power cord with at least 0.5 square copper wire2. When installing or removing, turn off the power switch to avoid electric shock.3.The smoke exhaust interface must be fixed with waterproof insulating tape.4.The installation at the chimney interface must be firm, and the interface must be tightly integrated into the chimney to achieve the best effect.5.When the suction fan stops working, attention should be paid to the return flow of smoke through which smoke escapes.6. The smoke exhaust is placed on the chimney. The exhaust must be more than six meters away from the fire source, otherwise the exhaust fan will be burned. The temperature of the fireplace cannot burn the insulation layer of the power cord.Delivery content1° Suction fan

• Note!!! The operating voltage of the product is 190-230 V, and the chimney suction fan is used by leaving two wire ends for connection to the power source.
• The exhaust temperature of the chimney fan should not exceed 60°C. Otherwise, the suction fan will be burned.
• It is very suitable for fireplace accessories. The chimney draught fan generates suction and induces rapid smoke release to prevent the smoke from escaping smoothly from the flue due to the bad chimney. The smoke is not only discharged quickly, but also has excellent performance.
• Easy to install, very quiet, suitable for most types of fireplaces and no professional technicians are required for installation.
• Disconnect the power supply during installation or disassembly to avoid electric shock.